From 10 to 60 m length
and for all hull type
(monohull or catamaran)
Simple operation and a professional performance -
The NautoPilot NP60 ensures safe navigation on board of all small vessels from 10 up to 60 m length. Best steering performance at low speed and high speed up to 70 knots (approved according to the IMO-HSC - for High Speed Crafts).
The heading is set by turning a knob. During "trim mode" the rudder can be set by dodge function keys.
Selectable functions are "Heading control", "Track control", "Manual steering" and "Work mode" with second parameter set. With the watch alarm the system can be adjusted for optimum safety under all cruising conditions. Audible alarms is acknowledged with the Set-key. Additional monitoring devices can be connected.
For heading control, gyro and magnetic or fluxgate compass can be connected.
Through automatic adaptation to the ship's speed, the control behavior of the NP60 is continuously optimized.
Course changes are carried out with operator selectable turn rates.
Please see also our new Gyro Compass
GyroStar II
to complete your navigation package
NP60 can be adapted to:
- Steering gears with switching and proportional solenoids
- Rudder propellers
- Twin-rudder adjustable equipment
- Water jet drives
- Bow thruster
Options and Extensions:
- Analog compass repeaters and digital compass repeaters
- Steering tillers (follow-up or non-follow-up) with built-in take-over function
- Rudder position indicators
- Secondary autopilots operator units
Technical Data:
| Power supply: |
10 to 36 V DC |
| Power consumption: |
approx. 10 W |
| Output for steering gear |
Switching output:2 x 24 V DC max. 48 W
Analog output:2 x potential-free
Max. set rudder value± 10V DC/5 mA
Variable voltage for max set rudder value |
| Monitoring: |
Steering failure monitoring integrated |
| EC Type Examination acc. to MED 96/98/EC: |
| Certificate no.: |
15 915-00 Lux |
| GL requirements for High Speed Crafts: |
| Certificate no.: |
15 922-00 HH |
Brochure ... 711 kb .pdf
GET
